PNT 27.14
TextWorking DiagramImageReach
Mobile Elevating Work Platform WT 450
DescriptionImagesReachFeaturesOperational AreasStandard EquipmentAdditional Equipement
- Telescopic mobile elevating work platform with a 4-section extension boom and a 2-section telescopic cage boom; cage placed behind and driver’s cab below the telescopes.
- H-type stabilisers at the front and rear. One or both sides extendible, to be controlled from the cage.
- Assembled onto 18 t chassis.
- Excellent manoeuverability in traffic through compact and lightweight design.
- Cage places behind the driver’s cab, therefore extreme short travelling length.
- Short stabilising width with height levelling capacity.
- Smooth and jolt free running of telescopes by optimised slide bearings and deformation resistant hexagon profiles.
- Finely adjustable and robust electric-hydraulic cage levelling system, examination of the controls via SPC.
- Electronic controlled “Load moment limit” system define the working envelope, depending on the current cage load and stabiliser configuration.
- Bearings are maintenance free.
- Optimal protection of all supply and control lines from external damage, prevents breakdowns and costly repairs.
- Rental companies.
- Power supply companies.
- Inspection of wind power stations.
- Glass and exterior cleaning.
- Renovation and Restoration companies.
- Telecommunications companies.
- TV and film work.
- Installation and assembly companies
- Aluminium cage, 2 * 80 degrees rotatable.
- 4 anchor points for safety harnesses.
- Diagnose and information system (Display).
- Automatic R.P.M. control via joystick.
- End stop damping of all movements.
- Emergency lowering system in the cage.
- Protective cover for the control panel.
- Illumination of the control panels.
- Secondary control at the base; utilisable as emergency control stable chassis covering of aluminium bulb plate.
- Aluminium side walls mounted on the chassis decking.
- 4 Spreader plates with bracket.
- Extensive anticorrosive packageHydraulic pump.
- Motor-start-stop from all control panels.
- Electric power line 230V/10A with residual current operated device.
- Rotating warning beacon.
- Buzzer in the driver’s cab, call button in the cage.
- Bracket for the spare wheel.
- Mudgaurds for the wheels.
- High quality 2 component acrylic paintwork.
- Assembly of the platform onto a suitable chassis.
- CE-Mark, declaration of conformity, test certificate.
- Check according to local vehicle and traffic regulations.
- 24V battery pump.
- Continuous stabilisation width with 4 step outreach adjustment.
- Cage overload prevention system acc. EN 280.
- Extensive anti-corrosive package.
- Height limitation.
- Memory function.
- Road marker cones with bracket.
- Mobile secondary control.
- WUMAG ELEVANT Tele Service.
- Halogen working lights.
- Electric Drive 400V
- Biologic hydraulic oil.
- Timber handrail on the cage.
- Dividing screen.
- Intercom system.
- Tree trimming cage.
- TV cage.
- Hydraulic extendible cage (L*W*H) 3,88m * 1,05m * 1,1m
- Parallel drive-function.
- Electric generator.
- Fixing for TV cable.
- Continuous stabilisation width with optimised outreach adjustment.